Wood Rejuvenator
Over time, untreated timber turns silvery grey in colour. This can be caused by several actions taking place including UV rays from the sun bleaching the colour out of the wood. Add in air pollutants and other biological actions taking place and your unfinished timber can end up looking grey and tired. Treatex Rejuvenator is a non-toxic, solvent free cleaning agent, based on natural ingredients including fatty acid extracted from Coconuts and Oxalic acid (found in Rhubarb leaves, Brassicas and Parsley). Treatex Rejuvenator gently lifts dirt and dead cells from the surface of the timber, restoring the colour back to its original state. It can be applied to both hardwood and softwood including decks, fences and garden furniture.Treatex.
Product Specs
Usage/coverage
Suitable for: internal and external use
Recommended timbers: Most hard and softwoods
Applications: Decking, cladding, windows, doors, garden furniture, garden structres etc.
1L will cover approximately 10m² on smooth timber, profiled timber will reduce coverage
2.5L will cover approximately 25m² on smooth timber, profiled timber will reduce coverage
Preparation/Application
Application
Treatex Rejuvenator works best when the timber is dry. If possible avoid applying in direct sunlight as this can dry the product out before it can work properly. If this is not an option, lightly dampen the surface with a sprayer and leave for around 10 -15 minutes. Apply a liberal coat using a 2 inch or 6 inch Treatex brush then leave for a few minutes. Lightly mist the surface with water before brushing vigorously with a stiff brush or broom. Rinse thoroughly with water to remove all of the product and allow to dry for 1- 2 days before finishing with one of the Treatex Exterior Oils/Anti Slip Decking Oil.
Tips
Treatex brushes available.
If using a pressure washer to rinse the timber, don’t hold the jet too close as this can damage the grain on the surface of the timber.
Sizes and product numbers
Item No. 41200
Sizes: 1L (e), 2.5L (h)
Suitable for: internal and external use
Recommended timbers: Most hard and softwoods
Applications: Decking, cladding, windows, doors, garden furniture, garden structres etc.
1L will cover approximately 10m² on smooth timber, profiled timber will reduce coverage
2.5L will cover approximately 25m² on smooth timber, profiled timber will reduce coverage
Application
Treatex Rejuvenator works best when the timber is dry. If possible avoid applying in direct sunlight as this can dry the product out before it can work properly. If this is not an option, lightly dampen the surface with a sprayer and leave for around 10 -15 minutes. Apply a liberal coat using a 2 inch or 6 inch Treatex brush then leave for a few minutes. Lightly mist the surface with water before brushing vigorously with a stiff brush or broom. Rinse thoroughly with water to remove all of the product and allow to dry for 1- 2 days before finishing with one of the Treatex Exterior Oils/Anti Slip Decking Oil.
Treatex brushes available.
If using a pressure washer to rinse the timber, don’t hold the jet too close as this can damage the grain on the surface of the timber.
Item No. 41200
Sizes: 1L (e), 2.5L (h)
You may also like
Links
