Hardwax Oil Ultra Clear
If you’re looking to enhance and protect the natural beauty of all your interior timber surfaces, look no further than Treatex Hardwax Oil Ultra Clear. Hardwax Oil Ultra follows the success of previous formulas, with the added improvement of a greater ease of application and durability of finish.
Not only is it quick drying and easy to use, but it also creates a hard wearing, attractive finish for any timber surface. This includes floors, doors, stairs, furniture and kitchen workshops. Combine with our great maintenance products and spot repairable solutions for the ultimate in timber protection.
We are committed to minimising the negative environmental impacts of our business, which is why our Treatex Hardwax Oil Ultra is made up of a formulation of sustainable raw materials including carnauba, bee and candelilla waxes along with linseed, sunflower and jojoba oils.
Easy to spot repair, clean and maintain with our range of products
Also recommended for those with dust allergies; dirt and dust can be removed easily
20 square metres per litre (single coat)
Best applied with a brush or roller
Can also be buffed on first coat for faster drying
Can be applied over Colour Tones Ultra
Can also be mixed with the following for extra benefits:
Hardener
R12 Anti Slip
Thinner & Brush cleaner
Child safe: EN71-3
Slip resistant: BS 7976-2PTV
Food safe: BS EN 1186-3:2002
Fire resistant: BS EN 13501‐1
Usually dry within 3-6 hours - dry in 1 hour when buffed
Product Specs
Usage/coverage
Suitable for: Internal use
Recommended timbers: All (dense/oily timbers may require Treatex Thinner). Has a warming effect on some timbers.
Applications: Floors, doors, stairs, worktops, woodturning, skirting, furniture, instruments etc.
Please Note!
Clear Hardwax Oil must always be used as the final coat when Colour Tones are applied
Coverage
125ml will cover approximately 2.5m² in one coat / 1.2m² in two coats depending on the timber and method of application.
500ml will cover approximately 10m² in one coat / 6m² in two coats depending on the timber and method of application.
1L will cover approximately 20m² in one coat / 12m² in two coats depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application.
5L will cover approximately 100m² in one coat / 60m² in two coats depending in the timber and method of application.
1L will cover approximately 3 doors in two coats depending on the timber and method of application
Preparation/Application
Application tool options
Hand brush
Floor Brush
Microfibre Roller
Buffing machine (first coat only, talk to us to find out more)
Preparation
Treatex Hardwax Oil Ultra works best on untreated timber but can be applied over a previous coating of hardwax oil if it is clean and suitable for treating. If in doubt of the type of finish, it is better to fully remove. Sand the timber to 120 grit to provide best absorption. Do NOT wash the surface with white spirit etc. or water after sanding. All sawdust should be removed with a hoover or tac cloth. Ensure that enough product has been purchased to complete the work as required. If applying to a floor with underfloor heating, make sure that the heating has off long enough for the floor to cool (at least 24hrs) and don’t switch on until the Hardwax Oil has dried sufficiently.
Application
Stir tin(s) thoroughly before applying. Evenly apply the first coat with a good quality brush (Treatex brushes are available) or a short pile micro fibre roller. Leave to dry for 3-6 hours, allowing sufficient ventilation to the room will ensure a reliable drying time. Once dry, apply a second coat and leave to dry. The surface should be fine for careful use after 8 hours. Furniture can be place on floors after approximately 18 hours. Breathable covers e.g cardboard, rugs etc. should not be placed down for 72 hours, non-breathable, vapour proof coverings such as plastic sheeting should not be placed over the surface for at least 14 days.
Maintenance
For general cleaning
Can be cleaned with Treatex Floor Care (concentrate for mop and bucket) or Treatex Spray On Floor and Surface Cleaner (pre diluted.) Follow instructions to keep floors, worktops and other surfaces clean and maintained.
For periodic surface maintenance
When the surface begins to look tired but not worn through to bare timber, the following processe can be followed:
Surface can be cleaned with Treatex Preparation Cleaner (cleans surface and removes small layer of wax). Once dry, a coat of Treatex Wax Polish can be buffed in or a fresh coat of Hardwax Oil Ultra Clear can be applied and left to dry.
Tips
- Do not apply the product too thickly as drying time will be significantly increased. The best conditions for drying are to raise the room temperature and increase the airflow using windows, a fan or opening a door.
- We stock great-quality Treatex brushes and rollers for use. alternatively use a high-quality microfibre roller or brush.
- Wrap a plastic bag around wet rollers and brushes to prevent them from drying out between coats.
- Treatex Thinners or white spirit are the best way to clean wet brushes and rollers.
Self combustion
- Treatex contains Linseed oil just like other natural oil-based products. You should therefore empty the sawdust out of your mechanical sander before working with anything that has a freshly applied linseed oil-based product. This is because there is a small but possible risk of self-combustion.
Sanding requirements
- Sanding is not usually required between coats of hardwax oil, however there is a chance that the grain may raise. If that is the case, a light sand at 120 grit will help smooth the surface.
Sizes and product numbers
Item No. 210 (Flatt Matt) 220 (Matt) 230 (Satin) 240 (Gloss)
Sizes: 0.5L (d), 1L (e), 2.5L (h), 10L (p) (Gloss only comes in 1L and 2.5L)
Suitable for: Internal use
Recommended timbers: All (dense/oily timbers may require Treatex Thinner). Has a warming effect on some timbers.
Applications: Floors, doors, stairs, worktops, woodturning, skirting, furniture, instruments etc.
Please Note!
Clear Hardwax Oil must always be used as the final coat when Colour Tones are applied
Coverage
125ml will cover approximately 2.5m² in one coat / 1.2m² in two coats depending on the timber and method of application.
500ml will cover approximately 10m² in one coat / 6m² in two coats depending on the timber and method of application.
1L will cover approximately 20m² in one coat / 12m² in two coats depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application.
5L will cover approximately 100m² in one coat / 60m² in two coats depending in the timber and method of application.
1L will cover approximately 3 doors in two coats depending on the timber and method of application
Application tool options
Hand brush
Floor Brush
Microfibre Roller
Buffing machine (first coat only, talk to us to find out more)
Preparation
Treatex Hardwax Oil Ultra works best on untreated timber but can be applied over a previous coating of hardwax oil if it is clean and suitable for treating. If in doubt of the type of finish, it is better to fully remove. Sand the timber to 120 grit to provide best absorption. Do NOT wash the surface with white spirit etc. or water after sanding. All sawdust should be removed with a hoover or tac cloth. Ensure that enough product has been purchased to complete the work as required. If applying to a floor with underfloor heating, make sure that the heating has off long enough for the floor to cool (at least 24hrs) and don’t switch on until the Hardwax Oil has dried sufficiently.
Application
Stir tin(s) thoroughly before applying. Evenly apply the first coat with a good quality brush (Treatex brushes are available) or a short pile micro fibre roller. Leave to dry for 3-6 hours, allowing sufficient ventilation to the room will ensure a reliable drying time. Once dry, apply a second coat and leave to dry. The surface should be fine for careful use after 8 hours. Furniture can be place on floors after approximately 18 hours. Breathable covers e.g cardboard, rugs etc. should not be placed down for 72 hours, non-breathable, vapour proof coverings such as plastic sheeting should not be placed over the surface for at least 14 days.
For general cleaning
Can be cleaned with Treatex Floor Care (concentrate for mop and bucket) or Treatex Spray On Floor and Surface Cleaner (pre diluted.) Follow instructions to keep floors, worktops and other surfaces clean and maintained.
For periodic surface maintenance
When the surface begins to look tired but not worn through to bare timber, the following processe can be followed:
Surface can be cleaned with Treatex Preparation Cleaner (cleans surface and removes small layer of wax). Once dry, a coat of Treatex Wax Polish can be buffed in or a fresh coat of Hardwax Oil Ultra Clear can be applied and left to dry.
- Do not apply the product too thickly as drying time will be significantly increased. The best conditions for drying are to raise the room temperature and increase the airflow using windows, a fan or opening a door.
- We stock great-quality Treatex brushes and rollers for use. alternatively use a high-quality microfibre roller or brush.
- Wrap a plastic bag around wet rollers and brushes to prevent them from drying out between coats.
- Treatex Thinners or white spirit are the best way to clean wet brushes and rollers.
Self combustion
- Treatex contains Linseed oil just like other natural oil-based products. You should therefore empty the sawdust out of your mechanical sander before working with anything that has a freshly applied linseed oil-based product. This is because there is a small but possible risk of self-combustion.
Sanding requirements
- Sanding is not usually required between coats of hardwax oil, however there is a chance that the grain may raise. If that is the case, a light sand at 120 grit will help smooth the surface.
Item No. 210 (Flatt Matt) 220 (Matt) 230 (Satin) 240 (Gloss)
Sizes: 0.5L (d), 1L (e), 2.5L (h), 10L (p) (Gloss only comes in 1L and 2.5L)
Choosing between Hardwax Oil Ultra Clear and Soft White
We offer two types of Hardwax oil; Clear and Soft White. They are fundamentally the same product, but have two different effects. Whilst Clear can be used on pretty much any internal timber, Soft White has a specific job.
When Clear is applied to light coloured timbers such as oak, maple or very pale pines; it can have a warming or yellowing effect, bringing out a golden tone in the timbers. Whilst this is very pleasing, some people prefer the natural, pale appearance of the timber and this is where Soft White comes into effect.
Soft White contains a small amount of pigment that dries clear when applied. It is enough to help prevent the warming effect of the Clear hardwax oil
Untreated Oak
Hardwax Oil Ultra Soft White
Hardwax Oil Ultra Clear
Video
You may also like
Links
After multiple requests, we have had Treatex Hardwax Oil Ultra tested for use with food and liquids. We are pleased to say we passed all tests, including some that were not even necessary.
Certificates obtained:
BS EN 1186-3:2002 Overall migration in Aqueous stimulant by total immersion
BS EN 1186-14:2002 Overall migration in 95% Ethanol and Iso-Octane substitute tests
BS EN 71-3:2013+A1:2013 Migration of heavy metal from toys and toy materials
The certificate can be seen by clicking here
Also tested but not yet certifiable:
Formaldehyde release based on regulations 10/2011 EU
Chromium (VI) and Organic Tin
Both of these tests passed well within their required limits. Test results and certificates will be available in the near future.
Hardwax Oil Ultra (Clear) has been tested to the standard BS EN 13501‐1 and has passed with a result of Class Cfl‐s1, meaning it is flame retardant and is suitable for use in commercial flooring applications.
The certificate can be viewed by clicking here
Treatex Hardwax Oil Ultra (Clear) has been certified to the latest Child Safe standard, EN71-3:2019
View the certificate by clicking here
Treatex Hardwax Oil Ultra (Clear) has been certified to the latest Liquid Resistance standard, ASTM D1308-02 - Effect of Household Chemicals on Clear & Pigmented Coatings ref. Sect. 6.1.1 - Water, 6.1.13 Beverages with the best possible results
The certificate can be viewed by clicking here
Hardwax oil ultra clear has been certified to the standard BS 7976 –2: 2002
The certificate can be viewed by clicking here
