Teak Protection
For ultimate wood protection from water and UV rays, use Treatex Teak Protection. UV-resistant and highly water-resistant, it’s perfect for outdoor garden furniture or boat deck protection. Treatex Teak Protection will not flake or peel. Solvent free and made only from natural, sustainable elements (such as linseed and sunflower oil), Treatex Teak Protection is also safe to use, even on children’s toys.
This teak furniture protector is only suitable for untreated wood. Previous coatings should be removed and surfaces cleaned, clear of contaminants, and dry. This is in order for Treatex Teak Protection to soak evenly and well into the wood, offering the best all-over protection.
Suitable for use on children's toys
e.g. Oak, Sweet chestnut
Protects the timber from water ingress and silvering
Product Specs
Usage/coverage
Suitable for: internal and external use
Recommended timbers: Teak and Iroko
Applications: Garden furniture and boat decks
1L will cover approximately 15m² in one coat depending on timber and method of application
Preparation/Application
Preparation
Treatex Teak Protection will only work on unfinished timber. Previous finishes must be fully removed prior to application. If timber is grey and weathered then it should be sanded back or cleaned with Treatex Wood Rejuvenator to restore its natural colour before application. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. We advise that when using Treatex Teak Protection, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. Timber must have a moisture content below 18%. Temperature must be greater than 8º𝚌 during application and drying. A trial application is essential prior to starting the project.
Application
Stir container thoroughly, before and during use. Use a brush to apply Treatex Teak Protection in liberally and evenly in the same direction as the wood grain, allowing approximately 60-70ml per m². This product works best when the second coat is applied ‘wet on wet’. This means a second coat should be applied, in the same way as above, before the first coat is dry. After the second coat leave to dry for approximately 12 hours. If the Teak readily absorbs the the second coat, apply a third coat before the second coat dries (this can be seen in our Teak protection application video on this page).
Tips
When treating multiple pieces of garden furniture e.g. a table and chairs, only treat 2 pieces at a time to ensure that the first coat cannot dry fully before applying the second wet on wet coat.
We recommend a fresh coat is applied once a year.
Treatex brushes are available. Wet brushes can be cleaned with warm soapy water.
Store containers in a cool and frost free environment. Unopened containers will last for three years. Once containers are opened, transfer contents to a smaller airtight container.
Sizes and product numbers
Item No. 31100
Sizes: 1L (e)
Suitable for: internal and external use
Recommended timbers: Teak and Iroko
Applications: Garden furniture and boat decks
1L will cover approximately 15m² in one coat depending on timber and method of application
Preparation
Treatex Teak Protection will only work on unfinished timber. Previous finishes must be fully removed prior to application. If timber is grey and weathered then it should be sanded back or cleaned with Treatex Wood Rejuvenator to restore its natural colour before application. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. We advise that when using Treatex Teak Protection, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. Timber must have a moisture content below 18%. Temperature must be greater than 8º𝚌 during application and drying. A trial application is essential prior to starting the project.
Application
Stir container thoroughly, before and during use. Use a brush to apply Treatex Teak Protection in liberally and evenly in the same direction as the wood grain, allowing approximately 60-70ml per m². This product works best when the second coat is applied ‘wet on wet’. This means a second coat should be applied, in the same way as above, before the first coat is dry. After the second coat leave to dry for approximately 12 hours. If the Teak readily absorbs the the second coat, apply a third coat before the second coat dries (this can be seen in our Teak protection application video on this page).
When treating multiple pieces of garden furniture e.g. a table and chairs, only treat 2 pieces at a time to ensure that the first coat cannot dry fully before applying the second wet on wet coat.
We recommend a fresh coat is applied once a year.
Treatex brushes are available. Wet brushes can be cleaned with warm soapy water.
Store containers in a cool and frost free environment. Unopened containers will last for three years. Once containers are opened, transfer contents to a smaller airtight container.
Item No. 31100
Sizes: 1L (e)
Video
You may also like
Links
